[Model] AK-47

RaVNzCRoFT · Post by **RaVNzCRoFT** » Sun Oct 15, 2006 11:10 am

The one thing I don't like is that poly error on the front of the weapon. I just can't get rid of it.

Third weapon model ever.

Oops, forgot a wireframe. I'll post it if anyone wants it. :leet:

Dr.Cox · Post by **Dr.Cox** » Sun Oct 15, 2006 11:11 am

Nice Job... I cant wait to see the Final!

dos mes · Post by **dos mes** » Sun Oct 15, 2006 2:19 pm

Not too shabby

Try making it a little bit more detailed though and it would be awesome.

cooldude5990 · Post by **cooldude5990** » Sun Oct 15, 2006 2:59 pm

not bad but missing key details, if you want i can circle what you can fix but only with your permission, i dont want to draw all over it unless you want me to

RaVNzCRoFT · Post by **RaVNzCRoFT** » Sun Oct 15, 2006 3:05 pm

Of course you have permission. Also, I know I didn't do the scope thing on the back.

Dr.Cox · Post by **Dr.Cox** » Sun Oct 15, 2006 3:22 pm

Oh... the ammo clip looks wierdish

cooldude5990 · Post by **cooldude5990** » Sun Oct 15, 2006 3:22 pm

alright now i now its a wip so some of this like the rear site you will but i added it just as a reminder

1 Your missing the gas chamber under the barrel

2 the hole isnt an actual hole, it goes threw to the other side you shouldnt see inside the model

3 The site

4 the foregrip isnt fluent with the gun and the bottom should be alot more rounded

5 the above indent should be where the circle is, and more of a rectangle

6 this is a rectangle that is longer, shouldnt realy be a cylender

7 the grip is skinnier than the reciever

8 the stock isnt fluent with the gun and its more rounded

sorry for being harsh but thats what makes you better

RaVNzCRoFT · Post by **RaVNzCRoFT** » Sun Oct 15, 2006 4:16 pm

Sweet, thanks for all the critiques!

As for the gas chamber, I was going to do it, but something happened...I forget what...and I didn't do it. I'll do that later.

As for the back sight, I'll also do that later.

As for the shoulder stock, the bottom is kind of flat, but the top of it is more rounded like what you're talking about.

And as for the holes, they are actually holes that go through the whole way. However, the light sources make it look like you can see into the gun as opposed to into a hole. I'm bad at rendering, so that's why it looks weird. I also suppose you could have seen that if I had posted a wireframe render. So that's also my fault.

And as for all the other details, at this point I'm more focused on being able to add details, rather than adding details and staying on my reference images. But thanks a whole lot! Your comments really helped!

rossmum · Post by **rossmum** » Sun Oct 15, 2006 9:56 pm

Along with what cooldude already pointed out, the barrel assembly looks a little too small diameter-wise, the front sight assembly needs to have a hole right through the middle, and it looks like it's been chamfered which isn't really necessary as you won't see the front of it up close enough to notice. The magazine should be a different shape viewed from above or below (google it), and the chamfer on the top of the gun looks like it's been overdone. Trigger guard also looks a bit narrow.

If you need any help getting references or doing stuff, I'll help you out.

The science of Kaboom · Wed Oct 18, 2006 4:55 pm

cooldude5990 wrote: 8 the stock isnt fluent with the gun and its more rounded

Your moms not fluent with the gun! OOHHHHH you just got pwned! jk, anyways its an ok model looks too blocky imo.

Patrickssj6 · Post by **Patrickssj6** » Wed Oct 18, 2006 5:01 pm

The science of Kaboom wrote:
cooldude5990 wrote: 8 the stock isnt fluent with the gun and its more rounded
Your moms not fluent with the gun! OOHHHHH you just got pwned! jk, anyways its an ok model looks too blocky imo.

Your mom is like a shotgun,2 cocks and she blows.

OHHHH OWNED!!!!

fishface617 · Post by **fishface617** » Wed Oct 18, 2006 5:10 pm

heh patrick nice one.

anyways good job on the model ravnz

rossmum · Post by **rossmum** » Wed Oct 18, 2006 9:42 pm

Patrickssj6 wrote:
The science of Kaboom wrote:
cooldude5990 wrote: 8 the stock isnt fluent with the gun and its more rounded
Your moms not fluent with the gun! OOHHHHH you just got pwned! jk, anyways its an ok model looks too blocky imo.
Your mom is like a shotgun,2 cocks and she blows.

OHHHH OWNED!!!!

OH SNAP. YOU WIN.

Any updates?

Hyperdash · Post by **Hyperdash** » Wed Oct 18, 2006 10:22 pm

Not bad looks cool but if you need extra info on the real gun (Firing rates, ammo count, etc.) check this page out: AK-47 Info. It has a pic of it as well

tumideon821 · Post by **tumideon821** » Mon Oct 30, 2006 5:17 pm

sorry about bump but maybe to get the poly count down make it a Ak47SU, the SU has a folding stock on it, it should be a winch sort of thing near the back of the gun where the stock meets that actual thing, it would look more hollow and everything

The clip does need a little more detial i got some suggestions (there are two clips)

1) Bananna Clip:
-It has grooves down it in the center
-It is not so curvey, it is actually pretty straight

2) Barrel Clip:
-It looks like a drum fed weapon (World War II Thompson, ect), without grooves i believe
-Inside the barrel it is belt fed, so the FP model of the clip should have the .223 rounds out of it (.223 is really small, it looks like the 7.62NATO and .302 Winchester but a lot smaller)

It would look cool if it had a bayonet

just some friendly suggestions it is your gun not mines

RaVNzCRoFT · Post by **RaVNzCRoFT** » Mon Oct 30, 2006 6:03 pm

Thanks for the suggestions mate, but I think I'm going to leave the model as is. It's already been put into Team deltaHalo's newest mod, so I think I'm keeping it like this for now. I may revisit this one, though.

The science of Kaboom · Mon Oct 30, 2006 6:08 pm

Patrickssj6 wrote:
The science of Kaboom wrote:
cooldude5990 wrote: 8 the stock isnt fluent with the gun and its more rounded
Your moms not fluent with the gun! OOHHHHH you just got pwned! jk, anyways its an ok model looks too blocky imo.
Your mom is like a shotgun,2 cocks and she blows.

OHHHH OWNED!!!!

You big meanie!!!! jk lmfao that was awesome!!!

Deathshop · Post by **Deathshop** » Wed Nov 01, 2006 3:41 pm

Yay an ak nice model hope to see the finished version soon.

Nitemare · Post by **Nitemare** » Wed Nov 29, 2006 3:55 pm

needs something, i just cant put my finger on it....

SnaFuBAR · Post by **SnaFuBAR** » Wed Nov 29, 2006 6:08 pm

you didn't need to bump this topic