weapon pickup

Discuss general issues about modding HaloPC. Post ideas for mods here.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

weapon pickup

Post by tucker933 »

well ive swapped a bunch of stuff around with the flamethrower to make a spartan laser, but have the model of a plasma cannon while keeping the normal plasma cannon still on the map so i swapped the model and a few other things but i have one problem. when it runs out of amo u cant pick it up again., the reason why is because like with a weapon with a clip if u give it 1 clip to start with, it wont pick up any amo from like weapons. well thats whats like my problem, since its a flamethrower, it has canisters like clips, but i want it to function like a plasma cannon, how it will just drop the empty weapon for the full one, rather than try and pick up its non-existent amo
User avatar
guysullavin





Posts: 1542
Joined: Sun Sep 16, 2007 6:11 pm
Location: Niagara-on-the-lake
Contact:

Post by guysullavin »

well, what you could do is there might be a flag in the clip section of the weapon, and it may say something like "weapon exhausts upon depletion" or something along those lines
Image
Not Removing until Prototype comes out. Started 1/7/2009
obj1: DUDE'S GOT A POINT....I GIVE THIS PRODUCT A TRY....HELL WHAT COULD GO WRONG!
waev: caps lock might
User avatar
xbox




Blacksmith

Posts: 2022
Joined: Wed Jul 28, 2004 3:28 pm
Location: Hi.

Post by xbox »

look at the setting for the the fuel rod gun in HMT and compare it to the flame thrower until you find what you want with trial and error.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

guysullavin wrote:well, what you could do is there might be a flag in the clip section of the weapon, and it may say something like "weapon exhausts upon depletion" or something along those lines
ive looked =\ no flags
xbox wrote:look at the setting for the the fuel rod gun in HMT and compare it to the flame thrower until you find what you want with trial and error.
ive checked that as well, no luck
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

give it no ammo, and use heat/energy, just like plasma weapons.

Make sure that you have phenom's plugins pack, and go to the weapon branch, click it, and under triggers, make heat generated per round equal 1, and make age generated per round 0.2

Then go up, and find other heat values,

Heat Recovery Threshold=1E-09.
Overheated Threshold=1
Heat Detonation Threshold=1
Heat Detonation Fraction=0
Heat Loss Per Second=0.5
Heat Illumination=0


This will make it shoot once, overheat, then wait for 2 seconds before you can fire again. The Heat Recovery Threshold is what the heat level must be for it to be able to shoot, 1E-09 is very small, 0 wont work.

The 0.2 for age generated will make it lose 20 energy for each shot, out of a total of 100. 100/20=5! 5 Shots! Yay!

The Overheated Threshold I believe is what level it is when it's overheated
IDK what the next two are, heal loss per second is just that, and the Heat Illumination is how bright of a light appears from being overheated. 0 makes no light appear, which is what you want.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

DeadHamster wrote:give it no ammo, and use heat/energy, just like plasma weapons.

Make sure that you have phenom's plugins pack, and go to the weapon branch, click it, and under triggers, make heat generated per round equal 1, and make age generated per round 0.2

Then go up, and find other heat values,

Heat Recovery Threshold=1E-09.
Overheated Threshold=1
Heat Detonation Threshold=1
Heat Detonation Fraction=0
Heat Loss Per Second=0.5
Heat Illumination=0


This will make it shoot once, overheat, then wait for 2 seconds before you can fire again. The Heat Recovery Threshold is what the heat level must be for it to be able to shoot, 1E-09 is very small, 0 wont work.

The 0.2 for age generated will make it lose 20 energy for each shot, out of a total of 100. 100/20=5! 5 Shots! Yay!

The Overheated Threshold I believe is what level it is when it's overheated
IDK what the next two are, heal loss per second is just that, and the Heat Illumination is how bright of a light appears from being overheated. 0 makes no light appear, which is what you want.
can anyone link me to these plugins? search yields nothing
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

http://forums.halomods.com/index.php?f=41

First Thing Stickied at the top, 64 Plugin Pack.

3rd Page Corvette19 posted 12 mirrors, download from 1 of those
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

DeadHamster wrote:give it no ammo, and use heat/energy, just like plasma weapons.

Make sure that you have phenom's plugins pack, and go to the weapon branch, click it, and under triggers, make heat generated per round equal 1, and make age generated per round 0.2

Then go up, and find other heat values,

Heat Recovery Threshold=1E-09.
Overheated Threshold=1
Heat Detonation Threshold=1
Heat Detonation Fraction=0
Heat Loss Per Second=0.5
Heat Illumination=0


This will make it shoot once, overheat, then wait for 2 seconds before you can fire again. The Heat Recovery Threshold is what the heat level must be for it to be able to shoot, 1E-09 is very small, 0 wont work.

The 0.2 for age generated will make it lose 20 energy for each shot, out of a total of 100. 100/20=5! 5 Shots! Yay!

The Overheated Threshold I believe is what level it is when it's overheated
IDK what the next two are, heal loss per second is just that, and the Heat Illumination is how bright of a light appears from being overheated. 0 makes no light appear, which is what you want.
this doesn't fix the ability to pick it up after empty =\
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

In halo PC, you can always pick up empty weapons.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

DeadHamster wrote:In halo PC, you can always pick up empty weapons.
the whole reason i posted this was because you cant swap and empty one for a full one, and i explained why above, but idk how to fix it
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

ahhh i see. well hmmm....


Duplicate a plasma cannon. Thats the only way I can see it working. Unless theres some hax that changes the weapon from ammo-energy that I know not.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

DeadHamster wrote:ahhh i see. well hmmm....


Duplicate a plasma cannon. Thats the only way I can see it working. Unless theres some hax that changes the weapon from ammo-energy that I know not.
=\ i already have a plasma cannon that im not nearly about to get rid of on the map, thats why i copied the model to the flamethrower =\

i decided to give it a clip, so u can pick up as i renamed them "batteries" from the other plasma cannons converted into spartan lasers and set it so it went from clip to clip without more than a half second pause, still not perfect, but it fixes the problem in a way

thanks for trying to help though
User avatar
xbox




Blacksmith

Posts: 2022
Joined: Wed Jul 28, 2004 3:28 pm
Location: Hi.

Post by xbox »

For ammo you can just make it overheat when it fires and take away 20 blah of energy whenever fired. I don't know if you already did this I didn't really understand your post.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

xbox wrote:For ammo you can just make it overheat when it fires and take away 20 blah of energy whenever fired. I don't know if you already did this I didn't really understand your post.

that doesnt fix the ability to pick up a new one when the first one dies =p

say you pick up a plasma cannon, and you shoot it till theres no amo left, and you want a new one, you go to the new one, and u cant pick it up what so ever without swapping it out for a diff weapon then picking it up. the reason is because i swapped the model to cover up a flamethrower, which uses the concept of clips (canisters technically) when you run out of amo in a flamethrower u go to another one and u pick up its old amo, you dont trade weapons for the new one, well since i swapped the models, i wanted it to act like the plasma cannon where u swap the old weapon for the new weapon, but you cant because it is trying to pick up its spare clips, and since it doesnt carry any spare clips because it only uses one to give the illusion of it working off a battery like a plasma cannon does, so theres no spare clips to pick up so it does nothing, what i want it to do is allow me to trade the old one for the new one as you do with a plasma cannon for example. thats my problem
Last edited by tucker933 on Wed Sep 03, 2008 5:13 pm, edited 1 time in total.
User avatar
xbox




Blacksmith

Posts: 2022
Joined: Wed Jul 28, 2004 3:28 pm
Location: Hi.

Post by xbox »

Then duplicate a fuel rod gun and start over from that.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

xbox wrote:Then duplicate a fuel rod gun and start over from that.
the flamethrower has effects which wont copy over to a true fuel rod, so i need it to be a disguised flamethrower
User avatar
xbox




Blacksmith

Posts: 2022
Joined: Wed Jul 28, 2004 3:28 pm
Location: Hi.

Post by xbox »

Like what?
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

Rebuild the map with a duplicated Plasma Cannon Tag, and you can have two totally seperate Plasma Cannons, that you can edit the model/skin/weapon info for, and have each be different.
User avatar
tucker933





Posts: 306
Joined: Mon Mar 24, 2008 8:10 pm
Location: CA
Contact:

Post by tucker933 »

xbox wrote:Like what?
http://screenshot.xfire.com/screenshot/ ... 0d226f.png

see the flame?

edit: i was thinking of changing the flame light volume to red so it matches, but that wouldnt really fit that well for people with original plasma bitmaps where the plasma is blue instead of red like mine
User avatar
xbox




Blacksmith

Posts: 2022
Joined: Wed Jul 28, 2004 3:28 pm
Location: Hi.

Post by xbox »

Can't you just swap the muzzle flare?
Post Reply