[model]flamethrower= brute shot (3rd person model)

EchoRanger449 · Post by **EchoRanger449** » Sat Nov 10, 2007 10:14 pm

This is in response to L33T's brute shot model. I noticed that I couldn't get the firing sound to work if I swapped the 3rd person model it, so i decided to make my own. This one'll enable you to add a little more detail to the disk. Size proportions are a little off- mostly for the front end and the "pipes".

Please feel free to leave comments and constructive criticism. Thanks!

Also, though the current skin will look a little worse than l33t's if left alone, I added a little more detail to the models so you can improve the effectiveness of your own skin.

I may add my own skin to the download, but I'm not too certain.

Alright, I just finished the skin- nothing real high quality, but it shows you the potential of this model.

Below is an example of what my model looks like with my skin

and next his L33T's model with my skin

Philly · Post by **Philly** » Sun Nov 11, 2007 3:55 am

Looking good. Did you use HHT to set the LOD?

EchoRanger449 · Post by **EchoRanger449** » Sun Nov 11, 2007 5:32 am

LOD? Sorry, the term is unfamiliar to me, but if you mean the distances that cause them to appear- I didn't in this screenshot, but I would in my final mod.

This model took roughly over 48 hours to do. If you have L33T's 1st person model, I'm very sure you'll enjoy having this model, especially if you want the brute shot to have a sound when it fires.

_FC_Homies · Post by **_FC_Homies** » Sun Nov 11, 2007 9:21 am

Looks good. 9/10.

I was working on a mod that looks like skins for the ground and cliffs in your pic, hah. Oh well I think i'll still release it soon.

Andrew_b · Post by **Andrew_b** » Sun Nov 11, 2007 12:48 pm

is master chief retarded?

(look at his left hand in the last picture.)

_FC_Homies · Post by **_FC_Homies** » Sun Nov 11, 2007 1:14 pm

rofllmfaobbqsauce.

I just now noticed that.

hahahahahahaha

EchoRanger449 · Post by **EchoRanger449** » Sun Nov 11, 2007 6:17 pm

Another reason why I made the model (the alignment for the 3PM and the 1PM are different).

Philly · Post by **Philly** » Mon Nov 12, 2007 8:51 am

Ahh, clever man.

EchoRanger449 · Post by **EchoRanger449** » Mon Nov 12, 2007 9:28 am

Thanks, I also got rid of the black streak (not the long one, the short one above it) which I didn't show in the screenshots. This model should be fairly easy to adjust on your own too, except the disk (PM me if you need the disk to be adjusted).

Also, the black section (that connects to the blade at the bottom of the brute shot) can be adjusted. I just made it really really dark to make it stand out.