model:Pick-up truck

kinkilla · Post by **kinkilla** » Mon Jan 08, 2007 5:50 am

thats very nice must have took you quite a while to get that perfected and etc... 9/10

Elite_Green_Devils · Post by **Elite_Green_Devils** » Mon Jan 08, 2007 11:10 am

kinkilla wrote:thats very nice must have took you quite a while to get that perfected and etc... 9/10

no lol only about 3 min model.

SilentKnight064 · Post by **SilentKnight064** » Mon Jan 08, 2007 1:59 pm

Holy crap, that's pretty fantastic. Collision would be great.

wasserbrunner · Post by **wasserbrunner** » Mon Jan 08, 2007 2:41 pm

looks pretty good..

7/10

Billy3764 · Post by **Billy3764** » Mon Jan 08, 2007 9:52 pm

dude u are become like the new DECOY. You are releasing so many great mods thats its awesome.

SilentKnight064 · Post by **SilentKnight064** » Tue Jan 09, 2007 3:23 am

I would say more like stepping in where caboose{SE} and [ZMT] left off, making us sweet remodels.

SHOUTrvb · Post by **SHOUTrvb** » Tue Jan 09, 2007 6:44 am

Needs more:

SotA-LimiteR · Post by **SotA-LimiteR** » Tue Jan 09, 2007 3:29 pm

SHOUTrvb wrote:Needs more:

LMAO what kinda truck is that

ceberus0 · Post by **ceberus0** » Tue Jan 09, 2007 7:23 pm

i thinks thats his, i saw it in the general chat section.[post your ride, i think]

peow130 · Post by **peow130** » Tue Jan 09, 2007 8:18 pm

Elite, you seem better at modelling than me..
So, how do i make my warthog have gigantic wheels While driving, And be lifted in the air.. So that the wheels look like they are Real..

Elite_Green_Devils · Post by **Elite_Green_Devils** » Tue Jan 09, 2007 8:34 pm

peow130 wrote:Elite, you seem better at modelling than me..
So, how do i make my warthog have gigantic wheels While driving, And be lifted in the air.. So that the wheels look like they are Real..

well.... to stop the dissapearing of the wheels at high speeds, edit the number 4 model.and tho change that, you use milkshape and take an unedited model the line it up and put a peice of tape on your screen so you know where the tire hits the ground.then after scaling the model up move the tape to the center of the wheel so you know where to put the hog's suspension.and move the hog (in a new thingy) up for a monster truck and put the suspension in the right place. and there you have it.(yes like to use tape

)

peow130 · Post by **peow130** » Tue Jan 09, 2007 8:40 pm

Elite_Green_Devils · Post by **Elite_Green_Devils** » Tue Jan 09, 2007 8:46 pm

peow130 wrote:O.O

lol if you hace an lcd monitor like darco9x2 tape is ok as long as you dont press hard lol

peow130 · Post by **peow130** » Tue Jan 09, 2007 9:53 pm

I have a crappy non-LED monitor ^^
(not even flat-screened)

Barringer_Resurrected · Tue Jan 09, 2007 10:03 pm

Elite_Green_Devils wrote:
peow130 wrote:Elite, you seem better at modelling than me..
So, how do i make my warthog have gigantic wheels While driving, And be lifted in the air.. So that the wheels look like they are Real..
well.... to stop the dissapearing of the wheels at high speeds, edit the number 4 model.and tho change that, you use milkshape and take an unedited model the line it up and put a peice of tape on your screen so you know where the tire hits the ground.then after scaling the model up move the tape to the center of the wheel so you know where to put the hog's suspension.and move the hog (in a new thingy) up for a monster truck and put the suspension in the right place. and there you have it.(yes like to use tape )

LMAO... ive never used tape before to be honest with you, i just used the little ruler at the bottom of milkshape to find what points it has to hit.

I have a crappy non-LED monitor ^^
(not even flat-screened)

Dude, thats a CRT you got there and IMO thats the best you can get cause they have unlimited resolution whereas the res. is limited on an lcd... In other words, much better for games. My 21 inch CRT is the only piece of Dell equipment that i will let in my house, other than that everythings custom made lol.

peow130 · Post by **peow130** » Tue Jan 09, 2007 10:07 pm

o.O
Unlimited resolution my ass It goes up to 1280x1024 pixels..
And it's a rounded screen.
It's a cheap 60$ monitor, but it gets the job done and it looks nice w/ my Geforce 6600

Barringer_Resurrected · Tue Jan 09, 2007 10:11 pm

peow130 wrote:o.O
Unlimited resolution my *** It goes up to 1280x1024 pixels..
And it's a rounded screen.
It's a cheap 60$ monitor, but it gets the job done and it looks nice w/ my Geforce 6600

Thats cause thats the resolution windows supports, ive seen it higher on other things... Besides, the overall performance is better with a CRT monitor than an lcd.

And it's a rounded screen.

WTF LOL i dont recall ever seeing a rounded screen on a comp before... only in those old futuristic movies that are in black and white.

-FC_Homies · Post by **-FC_Homies** » Tue Jan 09, 2007 10:20 pm

I don't like that model, or your "Technical" Either. The Technical is way to0 boxy, and this one looks kinda ladybug-ish. But I love how your models are really clean, no stray verts or crackly, pointy. Nice sniper models too. Oh, and dude he is not becoming the new DECOY. Decoy releases all kinds of CE to PC convert maps, all EliteGreenDevils does is remodel. And anyway, NOBODY will ever be the "New" or as good as DECOY. It is possible, but its just not going to happen. So, I'll give it a 5/10. Its not terrible, it's ok.

Halo_addict · Post by **Halo_addict** » Tue Jan 09, 2007 10:23 pm

Wow Im guessing thats a remodel cause this is PC so nice it looks sweet...im not gonna download cause model injections are to much of a pain in the a**

8/10, 10/10 if u get that turret on

kinkilla · Post by **kinkilla** » Wed Jan 10, 2007 6:11 am

Billy3764 wrote:dude u are become like the new DECOY. You are releasing so many great mods thats its awesome.

I dont think he is quite there yet lol Decoy Is wwwwwwwwaaaaaaaaaaaayyyyyyyyyy beyond this guy lol

HaloMods "Classic" Read-only Archive

model:Pick-up truck

sucks?