Problem connecting PC to Xbox via "SmartFTP".. Hel

[mmall06]

Hey ... Ive tired following the tutorial located in the "Halo2 Downloads" Section called ".::How to apply these mods::." Or something like that ... I havn't been able to contact the creator of the tutorial, "Martijn Gelissen"... So i was wondering if any of you great people could help me with my problem..

PROBLEM:

Okay... I recently bought a "Realtek RTL8139(A) PCI Fast Ethernet Adapter" from a local PC shop and installed it in order to transfer halo 2 maps from my xbox to the PC. I have all the tools in the tutorial made by Martijn...

[link to tutorial] = http://files.halomods.com/viewtopic.php?t=21471

I downloaded all the tools need and began to follow each step ... I am now stuck on the first step...
I browse to "system>network" on my modded xbox ... and veiw all the network settings ... IP, FTP settings, DNS, Gateway... ectect ... I type the xbox's I.P address in the address bar on "SmartFTP" ... followed by the username and password (xbox for both) ... as told to by the tutorial...

Address = 193.168.0.3
User = xbox
pass = xbox
port = 21

When i try to connect ... I get an error "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."

Before a stupid question is asked for example "Is the xbox turned on?", yes it is ... even though sometimes it can prove to be a common mistake.

I followed the "Troubleshooter" provided by "SmartFTP" and failed to solve the problem... I configured my firewall to "permit all" for "SmartFTP" ... but still got the same problem....

I would be forever greatful if anyone could spare me a moment of their time to help me out

Here are a number of ways to contact me:

E-mail: [email protected]
Msn Messenger: [email protected] (do not e-mail msn addy)
PM me: mmall06
XBL Username: mmall06

I am aware that this is such an early post but i have had past experiances with halomods and once i get this probalem solved ... I shall get into modding halo 2 and remain a loyal and proud member of "halomods.com"

Yours Faithfully,

mmall06

[mmall06]

Sorry if i'm boosting and double posting ... (kill me) But im desperate for help here ... And i feel the topic is going to be ignored or forgotten about and i will still be left with alot of wasted money and a problem to solve ..

Any form of advice would help ... even if its to go jump off a bridge somewhere ... lol

[superspy7]

Your XBOX is modded correct?

[mmall06]

Yes my xbox is modded.... I'm using a cross over cable ... trust me i have everything needed ...

[mmall06]

Ca mon guy's .. Im Itching to play mods and make them !!! any help atall would be apriciated

I think i'm gunna go insane knowing i have all the stuff and not being able to play them !!!! I need professional help .. Which is why i'm asking you guys

[kakarot]

lol k i will give you the guide that made me connect

1) go to My computer
2) Then control panel
3) Then network connections
4) then right click on the internet u are using...
5) Then click properties
6) Click on Internet Protocol (TCP/IP)
7) then click properties
then put ip as 192.168.0.4
9) Put subnet mask as 255.255.255.0
10) put default getaway as same as ur computer it is usually 192.168.0.1
11) Click ok and now for your xbox
12) go to your xbox and go to the modchip form and then change your network settings from there
13) when your in network settings change the ip to 192.168.0.5
14) Subnet mask 255.255.255.0
15) Default getaway as same as you put for your computer which should be 192.168.0.1
16) save changes
17) reboot your xbox and the ip for your xbox should be 192.168.0.5
18) now for your computer again...
19) go to firewall and turn it off just if you want to use smart ftp but for now turn it off
20) go to smart ftp and then put ip as 192.168.0.5
21) user name as xbox
22) password as xbox
23) you should be able to see all the folder like C, E, D and some others
24) ok if that doesn't work put your xbox ip address as 192.168.0.6 and then try it and if that doesn't work something is wrong with your xbox.
25) Good Luck

WOW took me about 10 minutes to write the tutorial lol

[halofun121]

I think I have that same ethernet card! .

Ok, the thing to do is this, you dont FTP into the adress on the dashboard. You FTP into the adress the NIC is set to. At least, thats how I do it with mine.

[mmall06]

I LOVE YOU GUYS !!! :D:D:D:D:D:D:D

Kakarot .. You rule man !!! I Want you to submit that tutorial in the tutorial section .. MAN YOUR THE BEST .. HAHAHA !!

You've made me so happy lol ... *sheds tear* ... TIME FOR MODDING

THANK YOU

mmall06 ... hehehe