(Halo 1)HMT v3.5 - Here it is folks!

WaeV · Post by **WaeV** » Sat Aug 14, 2004 2:40 pm

[EL]Krazie wrote:It won't work for me it says "The application failed to initialize properly (0xc0000135). Click OK to terminate the application.

I already installed Microsoft.NET frameworks SDK.

Please Help.

It's not SDK it's another one i think

bomb black smith · Post by **bomb black smith** » Sun Aug 15, 2004 10:18 am

ok when i got it and installed hmt3 i had to get that .net thing and SDK then it worked perfectly

Scrappersa · Post by **Scrappersa** » Sun Aug 15, 2004 8:46 pm

Well, it works perfectly for me. I followed the tutorial and everything. Now I want to test out the map but there's a problem. It says:

Once the build operation completes you will have successfully converted an SP bsp into a MP map, as well as injected a perfect model. You can open your new map in Sparkedit and see the pelican model (it will be the last thing in the list) In order to actually walk around, you will need to move your spawn points inside the map, since right now they are all outside in their original locations from Derelict (the scnr we used).

Now, the problem is that Sparkedit 3.2 won't open up the map to edit that. I can't open it with Sapien obviously because it's not a scenario tag and the map has already been compiled.

Then once I finish that, am I supposed to rename the file because if I don't, then it replaces another one of my maps...

Thanks a lot dude, this helps a lot, especially the tutorial.

[SE]JOHN · Post by **[SE]JOHN** » Thu Aug 19, 2004 4:22 am

I downloaded it before and it worked but my lil bro deleted it accidently and now when i download it,it wont work.

Stifler88 · Post by **Stifler88** » Thu Aug 19, 2004 3:08 pm

im having a problem too
here it is when i try to install HMT it gives me this

HunterX · Post by **HunterX** » Tue Aug 24, 2004 1:29 am

THANK U SO MUCK MONO U KICK ASS.
to bad ur leaving wwwaaaaaaaaa...

u guys dont show enough appreciation. this program is basicly wat half this site is based on.

Spartan X · Post by **Spartan X** » Tue Aug 24, 2004 7:52 am

Does this work with Halo CE?

[files]streyflip · Post by **[files]streyflip** » Thu Aug 26, 2004 5:25 pm

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.OverflowException: Arithmetic operation resulted in an overflow.
at HaloMap.Map.GetBytes(Int64 offset, Int32 size, Byte[]& binChunk)
at HaloSoundTools.frmMain.MenuItem7_Click(Object sender, EventArgs e)
at System.Windows.Forms.MenuItem.OnClick(EventArgs e)
at System.Windows.Forms.MenuItemData.Execute()
at System.Windows.Forms.Command.Invoke()
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
----------------------------------------
HaloMapTools
Assembly Version: 1.0.1560.18095
Win32 Version: 1.0.1560.18095
CodeBase: file:///C:/HMT.v3.5.Release/HMT.v3.5/HaloMapTools.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
----------------------------------------
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
----------------------------------------
HaloMap
Assembly Version: 1.0.1560.18095
Win32 Version: 1.0.1560.18095
CodeBase: file:///C:/HMT.v3.5.Release/HMT.v3.5/HaloMap.DLL
----------------------------------------
HMTLib
Assembly Version: 1.0.1560.18093
Win32 Version: 1.0.1560.18093
CodeBase: file:///C:/HMT.v3.5.Release/HMT.v3.5/HMTLib.DLL
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 7.0.5000.0
Win32 Version: 7.10.3052.4
CodeBase: file:///c:/windows/assembly/gac/microsoft.visualbasic/7.0.5000.0__b03f5f7f11d50a3a/microsoft.visualbasic.dll
----------------------------------------
System.Data
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/system.data/1.0.5000.0__b77a5c561934e089/system.data.dll
----------------------------------------
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
----------------------------------------
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
----------------------------------------
XPanderControl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/HMT.v3.5.Release/HMT.v3.5/XPanderControl.DLL
----------------------------------------

************** JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.

HOW DO I FIX THIS!! someone said it earlier but you people decided to flame that other guy.

Avalon111 · Post by **Avalon111** » Fri Aug 27, 2004 5:42 am

iam having a big problem with the model export in HMT3.5

when i import the obj file in milkshap or any other 3d program there is no geometry!
just one long line

after many many posts in forums and many advices like
" you have just to zoom in"
and other stuff like that

i tried to reimport the exported obj file into HMT3.5
and look what happened!!!

i tried this on my home PC, the office pc and my laptop.
always the same result

first open map c10
select the model

export it

everything seems okay

now import the exported obj

and this is how it looks after the import!

i think thats not the model i exported

it would be very very great if somebody maybe the author of HMT knows the answer why this happens and how i can get the models out of that map files!

kind regards
chris

New Age · Post by **New Age** » Thu Sep 02, 2004 11:33 am

same problem as the first post on this page. NOTE that the download only has the .exe where as last time i dowloaded it it had a few .ddl's and other things. Fix this now please

fire dragon · Post by **fire dragon** » Thu Sep 09, 2004 1:31 pm

um it dont work HMT isnt working on my computer nor anyone elses that i can tell so HOW can I FIX IT

conquer2090 · Post by **conquer2090** » Mon Sep 13, 2004 2:57 pm

i kant batch extract lol when i extract it it loads instantly and nothing goes where it should go...... nothing happens it just loads really fast

i lost my last hmt3.5 ver that worked fine and had to re dl it now it wont work lol

bomb black smith · Post by **bomb black smith** » Mon Sep 13, 2004 8:18 pm

go here to down load the .net frameworks thing http://v5.windowsupdate.microsoft.com/v ... x?ln=en-us you might have 2 click on express instaall then you should see a thing saying .net frameworks and such if that doesnt work then yohiu should try to also download the SDK thing

junit0524 · Post by **junit0524** » Tue Sep 14, 2004 12:31 pm

when i click a model i get "Modelib error" and it doesnt show me the model in the little box thing

David1 · Post by **David1** » Wed Sep 15, 2004 11:39 am

everything thing goes great 4 me, until it comes to rewriting the files. u r supposed 2 have some .xml files in ur C:\Project\Carousel Extract\levels\test\carousel folder, but they r not there. all i have is like 2 of those folders. what is happenin????
please im me asap or pm me or reach me at xfire. thanks AIM-Halo Sniper 311 XFire- halosniper311

JValentin · Post by **JValentin** » Wed Sep 22, 2004 7:55 am

Right, I've downloaded the HMT 3.5 Released rar file, extracted it n stuff, but I got this error The Application failed to initialize properly (0xc0000135). Click on OK to terminate the application.

It still does it when I paste over the HaloMapTools.exe from the fixed rar file, could ANYONE help me with this?

hitmanbob · Post by **hitmanbob** » Wed Sep 22, 2004 3:15 pm

U gotta dl .net framework

Latin4567 · Post by **Latin4567** » Sun Oct 03, 2004 5:28 am

How come the download link doesnt work anymore

MadClown · Post by **MadClown** » Sat Oct 09, 2004 7:33 am

it no work for me, nothing works for me

VirtualSickness · Post by **VirtualSickness** » Sun Oct 10, 2004 9:33 am

I downloaded it now what.
I extracted it using WinRAR but it gives me an error
System.IO.Filenotfoundexception and it wants me to debug...
WHAT THE HECK!

HaloMods "Classic" Read-only Archive

(Halo 1)HMT v3.5 - Here it is folks!

im getting an error dammit

dont work