dpad-up = increase cam speed
dpad-down = decrease cam speed
dpad-left = decrease look speed
dpad-right = increase look speed
lthumb+rthumb = toggle timefreeze
lthumb+dpad-up = increase vertical look shift
lthumb+dpad-down = decrease vertical look shift
lthumb+dpad-left = increase horizontal look shift
lthumb+dpad-right = decrease horizontal look shift
lthumb+black = disable cinematic mode
lthumb+white = enable cinematic mode
lthumb+back = stillcam
rthumb+dpad-up = decrease camera depth (move forward)
rthumb+dpad-down = increase camera depth (move back)
rthumb+dpad-left = increase fov (zoom out)
rthumb+dpad-right = decrease fov (zoom in)
rthumb+A = save camera state (shifts, fov, and depth)
rthumb+B = load camera state (shifts, fov, and depth)
rthumb+X = save gamestate
rthumb+Y = load gamestate
rthumb+back = cutscene cam
back+dpad-up = first person perspective
back+dpad-down = third person perspective
back+dpad-left = chasecam perspective
back+dpad-right = devcam perspective
black+dpad-up = increase z cam shift
black+dpad-down = decrease z cam shift
black+dpad-left = decrease y cam shift
black+dpad-right = increase y cam shift
white+dpad-down = auto hires grabber
white+dpad-left = vidcap
white+dpad-right = 360 degree shot
white+back = screenshot
while in devcam...
rtrigger = move up along z axis
ltrigger = move down along z axis
A+dpad-up = letterbox toggle
A+dpad-down = wireframe
A+dpad-left = hud toggle
A+dpad-right = ai toggle
A+black = decrease ambient light brightness
A+white = increase ambient light brightness
B+dpad-up = teleport to current camera coordinates
B+dpad-left = decrease gamespeed
B+dpad-right = increase gamespeed
X+dpad-up = secondary light vertical increase
X+dpad-down = secondary light vertical decrease
X+dpad-left = secondary light horizontal decrease
X+dpad-right = secondary light horizontal increase
X+black = decrease secondary light brightness
X+white = increase secondary light brightness
Y+dpad-up = primary light vertical increase
Y+dpad-down = primary light vertical decrease
Y+dpad-left = primary light horizontal decrease
Y+dpad-right = primary light horizontal increase
Y+black = decrease primary light brightness
Y+white = increase primary light brightness
REMEMBER. You have to only have one controller plugged in for Yelo to function correctly.
After you have found a good picture position, press the white and back button at the same time to take a picture. You can pretty much take unlimited pictures.
Take about 20-30 good pictures. We will filter out the bad ones later.
You know, if you actually expand that sentence out, it'll say "File Transfer Protocol to your Xbox". Doesn't really make sense eh ..other than that, very nice tutorial
Senor_Grunt wrote:so technically you cant get screenshots unless you have
an updated hard drive on your xbox...meaning bigger hard drive
Why are you assuming the stock HDD does not have enough space to store small little image files?..
Ah I see where your coming from now. Well, your right, halo2 doesn't fit completely on a stock HDD. So that's why we here only put maps on the HDD that we're going to play (excluding the mainmenu, shared and/or spshared maps that is, as they have to be there).
That way there's still loads of space left on the HDD, well, relatively anyway..
I have a v1.0 xbox with a stock hardrive. I can fit the AI revision and my modded halo 2 and have 800MB left over. (No singleplayer or bink things on it.)
Rockymods wrote:I have a v1.0 xbox with a stock hardrive. I can fit the AI revision and my modded halo 2 and have 800MB left over. (No singleplayer or bink things on it.)
Great tut though!
Ah I guess it can all fit then. Thinking about it I had the DLC installed as well as a million other gamesaves from different games.
Can i use something to put the eeprom from my current HD
to my new upgraded HD?
because i still want to play regular halo 2 on xbl without mods
I'm not positive, but they usually track your eeprom with the serial number of your xbox hard drive from what I've heard, so you might get banned from xbl if you go on with a different hard drive and same eeprom, you'll most likely get banned. If you've never signed on to live with that eeprom before, then you should be fine.
Senor_Grunt wrote:so what if i migrate my account to my 360 and then just use xbl for
halo 2 without mods from there..........can i THEN change my HD on
my xbox?
Yeah, it'll only ban that specific xbox if it signs in with a different hard drive than it originally had. Even if you got the xbox banned, you could migrate your account to the 360, because they don't ban accounts.
Yeah, it'll only ban that specific xbox if it signs in with a different hard drive than it originally had. Even if you got the xbox banned, you could migrate your account to the 360, because they don't ban accounts.
ok thanks!!
im getting a 360 on monday so ill wait to do that later....
cant you have the game on the "F" Drive and change the settings like you change for the "E" Drive just do it to the "F" Drive ? would that work or no ?
Thanks for the sig Xiion 
