HaloMods "Classic" Read-only Archive

I have all these good maps but i can host them because no one is able to join my server does it have anything to do with me having router ?

wtf damn reply already please

Werid thought, but maybe you have a password on?

Probably has to do with your firewall.

i too have the same problem, ( to go to firewall go to Start>control Panel> Security Setting (or something like that)> Windows Firewall> and allow halo....but i dont know if its UDP or the other one or how to get it down on my router....

Its called DMZ its in your router.

Okay i had the same problem, i am on a wireless lan though. if you are here is what you need to do. halo uses port 2302 so you need to open thast port. to do that, go to start>run type cmd then in the dos box type ipconfig okay were done with that part. now look at the default gateway address. mine is
192.168.1.1 now if yours is the same, copy and past it into your internet browser. then when the log in screen comes up, type in "admin" ( without the quotes ) for both the username and the password. now if your using linksys, go to gaming and apps. and there you can do port forwarding. okay now if your router makes you do a forward range like mine, type halo in for the application. then type 2300 in the first port box, and 2305 in the next. then keep it as both type of ports open, then go back to your dos prompt to find out your ip address. *make sure u use the very first one* it should be something like 192.168.1.xxx the last 3 numbers are what you need. type those into the box next to you ip address numbers. then finally, check the box on the right that says open port or something like that, and click save settings at the bottem. now your done! open halo and set up your server, get a friend to join right away to make sure it worked for you and u did everything right. if you need more help, or anyone else needs help, im me on my msn address. its [email protected] or i guess you could just e-mail me. haha well i hope that works.

oh the port type is tcp. but put both open ( it will open for tcp and udp )

Hyperdash wrote:Werid thought, but maybe you have a password on?

um NEGATIVE i do not have password on thanks for trying though:)

BEEF!!! wrote:Probably has to do with your firewall.

Have no firewall other than router i went to that and turned "firewall properties off" (IN ROUTER I DID THIS AND ALSO ON MY COMP)
still nothing

um ok here is the dmz page in my router says
DMZ Host
Respond to Ping on WAN Port (check box here) <-check this or not?
DMZ Address 192.168.0. (and a fill in box here) <- i think i should put some #"s here
hm what do i do

eternalcold wrote:Okay i had the same problem, i am on a wireless lan though. if you are here is what you need to do. halo uses port 2302 so you need to open thast port. to do that, go to start>run type cmd then in the dos box type ipconfig okay were done with that part. now look at the default gateway address. mine is
192.168.1.1 now if yours is the same, copy and past it into your internet browser. then when the log in screen comes up, type in "admin" ( without the quotes ) for both the username and the password. now if your using linksys, go to gaming and apps. and there you can do port forwarding. okay now if your router makes you do a forward range like mine, type halo in for the application. then type 2300 in the first port box, and 2305 in the next. then keep it as both type of ports open, then go back to your dos prompt to find out your ip address. *make sure u use the very first one* it should be something like 192.168.1.xxx the last 3 numbers are what you need. type those into the box next to you ip address numbers. then finally, check the box on the right that says open port or something like that, and click save settings at the bottem. now your done! open halo and set up your server, get a friend to join right away to make sure it worked for you and u did everything right. if you need more help, or anyone else needs help, im me on my msn address. its [email protected] or i guess you could just e-mail me. haha well i hope that works.

oh the port type is tcp. but put both open ( it will open for tcp and udp )

woah, i have wireless lan too, but i didnt quite understand the whole tut, mb a video tutorial?