[WIP] CityGulch

Discuss general issues about modding HaloPC. Post ideas for mods here.
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

[WIP] CityGulch

Post by DeadHamster »

I plan on making a level in CE, and, thanks to Harbringer, converting it straight to PC. I do not plan on releasing a CE version, so this is the right section.

It's a two story city level, two bases, in sorta symmetry. The first layer will contain ghosts and hogs, and will have wide areas and more closed in areas
The Second Layer are the rooftops, there are passages between each seperate building. The rooftops are great for sniping and getting usage of the Battle Rifle.

Here's a rough sketch I made.

Image

The level layout will most likely remain like this, but the weapon and vehicle positions will, more likely then not, change. If you have any suggestions on changing anything you see here, please let me know. I want to make this the best that it can be.

I know a couple things that need to be changed, because I can already see a few problems (difficulty in getting to the second story.)

I need skinners, and when the time comes around people who are willing to test this and work out any bugs in it. Credit obvioudly will be given.

When this is finished, it will be the first actual mod I release.
User avatar
Cryticfarm





Posts: 3611
Joined: Sat Dec 09, 2006 7:23 pm
Location: canada
Contact:

Post by Cryticfarm »

I would help model some of it...
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

That was fast.

I could use some help modeling weapons and stuff like that, but the BSP I'd rather do myself. Just because it's very hard to explain your ideas on how to build something, and mainly because I'd just like it to be "my map", I want to be able to run through it and know I made it.
User avatar
Philly




Collaborator

Posts: 3607
Joined: Thu Oct 12, 2006 9:08 am

Post by Philly »

It looks so damn complicated!
Please don't make it worse than Chiron TL-4, please...
For anybody still wondering where FTD has gone, here it is.
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

Its really not complicated at all, its a very open map.

Each one of those boxes are buildings, only the two bases are empty though. The rest are solid. The entire map is played outside.
It's like turf, but more open.

The "passages" that you see from each box are walkways on the second story. Just a flat piece, think of the things mario walks up on in the original Donkey Kong, thats what they are. And underneath that is all open, besides the buildings.
User avatar
Cryticfarm





Posts: 3611
Joined: Sat Dec 09, 2006 7:23 pm
Location: canada
Contact:

Post by Cryticfarm »

Use the bridge tool for the tunnels.
User avatar
BOB{MOD}





Posts: 254
Joined: Sun Jun 24, 2007 9:07 am
Location: Canada, B.C.

Post by BOB{MOD} »

nice whats the "Laser" going to be?
Image
Image
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

Im hoping some form of spartan laser.

Most likely not anything amazing, over the shoulder gun, you charge it like a plasma pistol, and when you release the trigger you shoot a beam-like projectile.

Uncharged shot shoots something else (less lethal beam maybe?). I dont want it to be a charge only weapon, i want it to have more versatility. The way the map is turning out, you need to be quick to hit a vehicle, If you wait too long it'll fall behind a building, so being able to shoot a quick shot and kill of the driver, then pick off the rest gives it more useable-ness then just the charge.

Im thinking the primary shot as a beam that can headshot, but does little damage anywhere else. It maintains the difficulty to use it, but at the same time it doesn't make it too difficult. Balance is key.
User avatar
Philly




Collaborator

Posts: 3607
Joined: Thu Oct 12, 2006 9:08 am

Post by Philly »

DeadHamster wrote:Balance is key.
Dead on. I hope this map goes well.
For anybody still wondering where FTD has gone, here it is.
User avatar
BOB{MOD}





Posts: 254
Joined: Sun Jun 24, 2007 9:07 am
Location: Canada, B.C.

Post by BOB{MOD} »

ok thats what i wanted to know
Image
Image
User avatar
Andrew_b




Socialist

Posts: 4188
Joined: Sat Feb 24, 2007 4:52 pm
Contact:

Post by Andrew_b »

ok so you plan on learning how to make a map...

good luck. youll need it.

and if you want good reviews, dont make it boxish like exterminator...hallways should not be boxes!!!
User avatar
Cryticfarm





Posts: 3611
Joined: Sat Dec 09, 2006 7:23 pm
Location: canada
Contact:

Post by Cryticfarm »

Hallways are boxed, thats the way most hallways are. Infact, I can't think of a hallway in real life that isn't boxish (other then the curved one). Do you have im? Cause I would give you help in modeling.
User avatar
Andrew_b




Socialist

Posts: 4188
Joined: Sat Feb 24, 2007 4:52 pm
Contact:

Post by Andrew_b »

look at the hallways closely...well in my house...hallways arent boxed. they have a floor thing which is like a design on the floor and on the wall...and then the top is curved with a very small curve. like an inch high curve.
User avatar
Cryticfarm





Posts: 3611
Joined: Sat Dec 09, 2006 7:23 pm
Location: canada
Contact:

Post by Cryticfarm »

Zomg one inch.
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

I have an AIM. And once had an Xfire that I no longer have downloaded, but can re-download.

And how should I make this unboxy, It's a city, buildings aren't made with curves. The main BSP is boxy, and then adding scenery makes it more in depth and gives it the feeling of an actual city. Putting garbage cans, crates, Cars, etc., ontop of the boxy city-scape gives it a more deep look.


I'll post a picture of the BSP in a moment or so, I just finished making it, just need to convert it to the right filetype.

And why is everyone talking about Hallways? There isn't a single hallway in this map, and I never said there was. Im so confused. :?:
User avatar
Cryticfarm





Posts: 3611
Joined: Sat Dec 09, 2006 7:23 pm
Location: canada
Contact:

Post by Cryticfarm »

Then what's your aim?
EDIT: frig, I should have pmed.
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

Do sent messages not appear in your sentbox right away or am I going crazy?
User avatar
SL!P
Readers Club





Posts: 751
Joined: Sat Sep 29, 2007 6:25 am
Location: You'd better join another site.

Post by SL!P »

Hey, this looks nice. I'm getting into map-making myself. I need ideas though. As for the Spartan laser.

1>Skin it
2>Minor Model altercations
3>make it shoot sentinel beams
Image
WTF
User avatar
DeadHamster




Snitch! Advisor Articulatist 500

Posts: 2289
Joined: Thu Feb 15, 2007 9:38 pm

Post by DeadHamster »

I was leaning more towards a custom model. Obviously Skinning, and yes, something simmilar to the sentinel beams. I was thinking blue laser for noncharged, red when charged. Simple enough.

Oh, and in case anyone here was curious, Gmax Sucks. Lots.
User avatar
Patrickh




Wordewatician 500

Posts: 1173
Joined: Wed Mar 14, 2007 4:53 pm

Post by Patrickh »

DeadHamster wrote:Do sent messages not appear in your sentbox right away or am I going crazy?
I thinks they are in you outbox until they are recieved/replied
And gmax is a nice program, that's what i used to make crisis. 3ds max is basically the same but upgraded.
Post Reply